WL-3 type pulley wire drawing unit

一、 Technical parameters, 6.5mm, 4.4mm-4.1mm.

The outlet speed is 150m-170m,4.4mm-4.1mm per minute per hour, the theoretical output is about 1000kg, and the installed power is 55.5kw frequency conversion. Overall size of the main engine, 3.6m long, 1.35m wide, 2.25m high, and weight of about 2.1 tons.

Two; the configuration list! Adopt heavy three-axis reducer, the pulley adopts B-type with three grooves, (using three-force triangle belt), all using the diameter of 500mm inlaid alloy drum, the finished drum diameter of 600mm inlaid alloy, using the new national standard motor, 18.5kw6 class 1,18.5kw4 class 2. Crane motor of 1.5 kkW class 4, one set of 22 kW frequency conversion electric cabinet (brand Anhui Langge), one set of unloading line crane, one set of mold hanging head, 3 sets of forced mold box, the frame is welded with 90mm angle steel, guide bar is welded with 80mm thickened square pipe, panel thickness of 2.0mm, motor frame is welded by 80mm thickened groove steel, and 1 unpowered stripping machine. Install the motor shield. Note: The voltage is 380V-50 HZ

III; Auxiliary equipment;

1-8 press 2500 yuan

A Type 10 butt welding machine is 1500 yuan

Car a 500 yuan auxiliary equipment total 4500 yuan, 5100 yuan after tax

 Note: Motor, reducer, alloy drum, frequency converter, warranty for one year, except vulnerable parts, artificial damage.

Note: The quotation does not include freight, reducer gear oil, wire and cable, tools and technicians.

Note: it is suggested to match the mold model;

（6.1mm-5.7mm）-5.0mm-4.4mm

（6.1mm-5.6mm）-4.8mm-4.1mm。

Anping County Taihuang Silk mesh Machinery Co., LTD

Tel.; 0318-7750456

Fax; 0318-7963335

Mobile phone; 13180012577-1530381036 

WL-3型皮带轮拉丝装置

一、技术参数：6.5 mm、4.4 mm—4.1mm

出口速度为150米-170米，每分钟4.4毫米-4.1毫米，理论输出约为1000公斤，安装功率为55.5千瓦变频器。主发动机整体尺寸为3.6米长，1.35米宽，2.25米高，重量约2.1吨。

二；配置列表！采用重型三轴减速器，皮带轮采用B型带三槽，（采用三力三角带），全部采用直径500mm的镶嵌合金滚筒，成品滚筒直径600mm镶嵌合金，采用新国标电机，18.5kw6级，11.85kw4级。1.5千瓦4级起重机电机，22千瓦变频电柜（安徽朗格品牌），1台卸料线起重机，1台模具吊头，3台模具强迫箱，机架采用90毫米角钢焊接，导杆采用80毫米厚方管焊接，面板厚度为2.0毫米，机架用80毫米厚的槽钢焊接；无动力剥线机1台。安装电机保护罩。注:电压为380V—50HZ

注:电机、减速器、合金滚筒、变频器，保修一年，易损件除外，人为损坏。

注:报价不含运费、减速器齿轮油、电线电缆、工具和技术人员。

注:建议与模具型号相匹配；

(6.1mm-5.7mm)-5.0mm-4.4mm

(6.1mm-5.6mm)-4.8mm-4.1mm.

安平县泰煌丝网机械有限公司

电话:0318-7750456

传真；0318—7963335

移动电话；